|  Brief introduction Steel cord is one of the main reinforcements for manufacturing radial tyres. It is a steel radial tyre reinforcement that stabilizes tyres during long driving hours under extreme bad conditions. Specification: We can supply all kinds of steel cords for manufacturing radial tyres, they are of simple structure, complicated structure and special structure. Packing: Packed in reels, and then put on pallets, using standard packing materials and methods. One 20' FCL container can hold 20 metric tons. Payment terms: L/C at sight or T/T.
Specifications of Simple Structure Steel Cord Type of construction | Lay length
±5%(mm) | lay
direction | Cord diameter
±5%(mm) | Break force
N(min) | Linear density
±5%(g/M) | Cord Length
per spool
BS40/BS60 | 2×0.30HT | 14 | S | 0.600 | 405 | 1.120 | 16300 | 3×0.30HT | 16 | S | 0.650 | 660 | 1.680 | 13000 | 2+1×0.28HT | ∞/16 | -S | 0.700 | 535 | 1.470 | 13000 | 2+1×0.30HT | ∞/16 | -S | 0.750 | 605 | 1.680 | 10000 | 2+2×0.25HT | ∞/14 | -S | 0.650 | 590 | 1.550 | 12500 | 2+2×0.28HT | ∞/16 | -S | 0.730 | 710 | 1.940 | 10000 | 2+2×0.30HT | ∞/16 | -S | 0.78 | 800 | 2.230 | 8100 | 2+2×0.32HT | ∞/16 | -S | 0.83 | 800 | 2.570 | 7000 | 2+2×0.35HT | ∞/16 | -S | 0.940 | 1050 | 3.030 | 6000 | 3+2×0.30HT | ∞/16 | -S | 0.900 | 1000 | 2.790 | 6000 | 3+2×0.35HT | ∞/18 | -S | 1.070 | 1310 | 3.820 | 4800 | 3×0.20 ﹢ 6×0.35HT | 10/18 | SZ | 1.130 | 1820 | 5.340 | 3500 | 2+7×0.20HT | 5.6/11.2 | SS | 0.760 | 870 | 2.260 | 8200 | 2+7×0.20HT+0.15HT | 5.6/11.2/3.5 | SSZ | 1.0300 | 870 | 2.440 | 5900 | 2+7×0.22HT | 6.3/12.5 | SS | 0.830 | 1060 | 2.740 | 7200 | 2+7×0.22HT+0.15HT | 6.3/12.5/5 | SSZ | 1.080 | 1060 | 2.900 | 5200 | 2+7×0.28HT | 8/16 | SS | 1.060 | 1560 | 4.450 | 4300 | 2+7×0.28+0.15HT | 8/16/3 .5 | SSZ | 1.330 | 2300 | 6.940 | 2800 | 2+7×0.35HT | 9/18 | SS | 1.330 | 2300 | 6.940 | 2800 | 2+1×0.28 | ∞/16 | -S | 0.700 | 470 | 1.470 | 13000 | 2+1×0.30 | ∞/16 | -S | 0.750 | 520 | 1.680 | 10000 | 4×0.25OC | 14 | S | 0.640 | 520 | 1.560 | 13000 | 2+2×0.25 | ∞/14 | -S | 0.650 | 520 | 1.550 | 12500 | 2+2×0.28 | ∞/16 | -S | 0.730 | 625 | 1.940 | 10000 | 2+2×0.30 | ∞/16 | -S | 0.780 | 700 | 2.230 | 8000 | 2+2×0.38 | ∞/16 | -S | 1.000 | 1055 | 3.600 | 5000 | 5×0.25 | 10 | S | 0.670 | 660 | 1.950 | 10000 | 3×0.15+6×0.27 | 9/10 | SZ | 0.850 | 1000 | 3.170 | 6400 | 3×0.20+6×0.35 | 10/18 | SZ | 10130 | 1590 | 5.340 | 35900 | 2+7×0.22 | 6.3/12.5 | SS | 0.830 | 920 | 2.740 | 7200 | 2+7×0.22+0.15 | 6.3/12.5 | SSZ | 1.08 | 920 | 2.900 | 5200 | 2+7×0.28 | 8/16 | SS | 1.060 | 1370 | 4.450 | 4300 | 2+7×0.28+0.15 | 8/16 | SSZ | 1.330 | 1370 | 4.640 | 3300 |
Specifications of Complicated Structure Steel Cord Type of
construction | Lay length ±5%(mm) | lay
direction | Cord
diameter
±5%(mm) | Break
force
N(min) | Linear
density
±5%(g/M) | Cord Length
per spool
BS40/BS60 | 12×0.22+
0.15CCHT | 12.5/5 | SZ | 1.180 | 1410 | 3.810 | 4000 | 12×0.22HT | 12.5 | S | 0.910 | 14100 | 3.640 | 5800 | 3×0.20/9×
0.175 CCHT | 10 | S | 0.750 | 960 | 2.490 | 8000 | 3×0.20/9×
0.175+0.15 CCHT | 10/5 | SZ | 1.020 | 960 | 2.650 | 6000 | 3×0.22/9×
0.20 CCHT | 12.5 | S | 0.880 | 1220 | 3.170 | 7000 | 3×0.24/9×
0.225+0.15 CCHT | 12.5/5.0 | SZ | 1.170 | 1460 | 4.10 | 4000 | 3×0.27/9×
0.20+0.15 CCHT | 12.5/5 | SZ | 1.110 | 1220 | 3.330 | 5000 | 3×0.32/9×
0.30+0.15 CCHT | 18/5 | SZ | 1.490 | 2410 | 7.190 | 2600 | 3×0.35/9×
0.32+0.15 CCHT | 18/5 | SZ | 1.660 | 2730 | 8.300 | 2000 | 3+9×0.175
+0.15HT | 5/10/3 .5 | SSZ | 1.000 | 890 | 2.490 | 6000 | 3+9×0.22
+0.15HT | 6.3/12.5/3.5 | SSZ | 1.170 | 1410 | 3.850 | 4000 | 3+9×0.25HT | 7/14.5 | SS | 1.020 | 1750 | 4.710 | 4600 | 3+9×0.25
+0.15HT | 7/14.5/5 | SSZ | 1.310 | 1750 | 4.890 | 3500 | 3+8×0.33HT | 10/8 | SS | 1.38 | 2530 | 7.55 | 2600 | 0.365+6×0.35HT | 10/18 | S | 1.08 | 1990 | 5.42 | 3600 | 0.20+18×
0.175CCHT | 10 | Z | 0.900 | 1440 | 3.730 | 6000 | 0.20+18×
0.20CCHT | 12.5 | Z | 1.020 | 1860 | 4.840 | 4700 | 0.25+18×
0.22CCHT | 12.5 | Z | 1.130 | 2180 | 6.050 | 4000 | 0.22+18×
0.20HT | 6.3/12.5 | ZZ | 1.1020 | 1840 | 4.860 | 3500 | 12×0.22
+0.15CC | 12.5/3.5 | SZ | 1.180 | 1200 | 3.840 | 4000 | 12×0.22CC | 12.5 | S | 0.910 | 1200 | 3.640 | 5800 | 3×0.2/9×
0.175CC | 10 | S | 0.750 | 840 | 2.490 | 8000 | 3+9×0.22 | 6.3/12.5 | SS | 0.920 | 1200 | 3.650 | 5000 | 3×0.2/9×
0.175+0.15CC | 10/5 | SZ | 1.020 | 840 | 2.650 | 6000 | 3+9×0.175+0.15 | 5/10/3 .5 | SSZ | 1.000 | 780 | 2.490 | 6000 | 3+9×0.22+0.15 | 6.3/12.5/3.5 | SSZ | 1.170 | 1200 | 3.650 | 5000 | 0.20+18×
0.175CC | 10 | Z | 0.900 | 1250 | 3.730 | 6000 | 0.20+18×
0.175CC | 12.5 | Z | 0.900 | 1250 | 3.710 | 6000 | 0.22+18×
0.20CC | 12.5 | Z | 1.020 | 1620 | 4.840 | 4700 | 0.25+18×
0.22CC | 16 | Z | 1.130 | 1960 | 5.850 | 4000 | 3+8+13×
0.18+0.21HT | 5/10/16 /3.5 | SSZS | 1.340 | 1670 | 5.100 | 3150 | 3+9+15×0.175 | 5/10/16 | SSZ | 1.070 | 1720 | 5.200 | 4000 | 3+9+15×
0.175+0.15 | 5/10/16 /3.5 | SSZS | 1.340 | 1720 | 5.420 | 3100 | 3+9+15×0.22 | 6.3/12.5/18 | SSZ | 1.350 | 2700 | 8.240 | 2700 | 3+9+15×
0.22+0.15 | 6.3/12.5/18/3.5 | SSZS | 1.620 | 2700 | 8.500 | 2000 |
Specifications of Special Structure Steel Cord Type of construction | Lay
length
±5%(mm) | lay
direction | Cord
diameter
±5%(mm) | Break
Tensile
stretch(%) | Break
force
N(min) | Linear
density
±5%(g/M) | Cord Length
per spool
BS40/BS60 | 3×4×0.22HE | 3.15/6.3 | SS | 1.180 | 5.5+/-1.5 | 940 | 3.950 | 4100 | 4×4×0.22HE | 3.5/5 | SS | 1.320 | 5.5/-1.5 | 1260 | 5.400 | 3100 | 3×6×0.22HE | 3.5/6.3 | SS | 1.500 | 6.5+/-1.5 | 1410 | 6.050 | 2450 | 3×7×0.20HE | 3.9/6.3 | SS | 1.390 | 6.5+/-1.5 | 1360 | 5.850 | 2800 | 3×7×0.22HE | 4.5/8 | SS | 1.520 | 6.5+/-1.5 | 1650 | 6.950 | 2400 | 3×2×0.35HE | 3.9/10 | SS | 1.420 | 5+/-1.5 | 1030 | 4.890 | 2700 | 4×2×0.35HE | 3.9/10 | SS | 1.590 | 5+/-1.5 | 1370 | 6.500 | 2100 | 5×0.35HI | 14 | S | 1.230 | 6.5+/-1.5 | 1130 | 3.920 | 3800 | 5×0.38HI | 14 | S | 1.340 | 6.5+/-1.5 | 1280 | 4.630 | 3500 | 4+6×0.38HI | -/22/22 | -SS | 1.580 | 6.5+/-1.5 | 290 | 8.950 | 1850 |
Note: All the above products can be produced according to customers' requirements. |
|
|
|
